Product Specifications: Length 12.5cm, width 6.5cm, thickness 1.7cm

Socket specifications: length 30cm, width 12.5cm, thickness 4.5cm

English control panel.

Wireless smart fish treasure with ultra-long distance within the control aquarium equipment, and based on individual user preferences, set the lighting of the timer switch, automatic switch of the temperature setting, and other related equipment.

The wireless controller has a digital display and automatic control of water temperature, lighting time period control function, and automatic and manual modes to choose from.

Auto Memory function. The remote control is turned off, will remain the pre-set parameters, lighting, UV lamps, and surfing the pump to retain the previous settings.

The automatic locking function. The controller uses a key switch design, each boot, the remote control will automatically collect the current aquarium water temperature and time, if a long time (more than 15 seconds) is not operating, touch screen will automatically lock the screen, then you just Press and hold any icon of a key three seconds more than can be achieved to unlock more than 10 minutes without operation, remote control into power-saving mode automatically shut down.

• size:15.8cm (6.2") X 10.8cm (4.3") X 29.5cm ( 11.6")
  
• With 6mm fast connector
  

• size:15.8cm (6.2") X 10.8cm (4.3") X 19cm ( 7.5")
  
• With 6mm fast connector
  

• size:20.8cm (8.2") X 20.8cm (8.2") X 29.5cm ( 11.6")
  
• With 6mm fast connector
  

Specification

1, Power:  120W,192W,264W Available
2, Size ( mm): 600x320x60mm, 900x320x60mm, 1200x320x60mm
3, Input voltage: 100~240VAC 50~60Hz work voltage: 12V or 24V
4, Infrared control distance: 0.5m~10m

5, Max Temperature of light: 65° C 
6, Work Temperature of fan: 55° C 
7, Bridgelux , Cree brand 3W LED bulb Available White10000k /White 14000k /  white 18000k/ blue 460nm /moon blue453nm/ purple427nm Color Ratio Customized
8, Optional 30,45,60,90 degree view angle

Feather

1. Three control ways: First is remote controller, Second is attached button on panel housing side, Third is power supply rotary knob to adjust total light brightness. The LED screen ensures clear observation of the controller and the convenience of manual control. Time set system can be accurate to the very minute. 

2. Import high-performance chips, ensure the luminous effects. The main light device uses high-power LED chips. No heat radiation, Hardly any UV comes from LED’s. No hurt on Coral and more suitable for aquarium.

3. Low energy consumption, more power efficiency. LED has the feature of high brightness and low energy consumption, so under the same brightness, using LED, power is only half of the traditional lamp. Besides, LED can emit light from some direction, completely different from the traditional lights, emitting from all directions.

4. Intelligent and passive cooling systems ensure the service life. The light is built in temperature sensors inside, which ensure the service life span. The fans start to dissipate heat when temperature of the LEDs reaches 60° C. On the contrary, the fans stop working in lower than 60° C. Few of the lights are turn off at night, the fan is unnecessary and fan noise can be avoided.

5. The light can operate automatically as predefined system. They can completely imitate the change of light in nature: The white lights turn gradually bright at dawn and turn gradually dark at dusk when the blue lights turn bright and only moonlight blue is left at midnight. The LEDs can even imitate the lunar cycle, which ensures better growth of your pets in this mimic nature light. Moreover, it can work normally even when you take a long time leave.It can simulate normal and four season(spring, summer, autumn and winter) in five mode.

6.Color temperature can be custom-made, which can be used for both sea and fresh water. The color temperature for seawater is around 15000K~18000k and for fresh water is around 9000K~12000K. Our LED lamps' color temperature can be used both in sea water and fresh water. Other color temperature of lamps can be ordered. Blue-ray is a particular wavelength of 453nm moon blue light, suitable for the vast majority of the growth of marine organisms.

7. There are two kinds of installation mode supporting the main light body: hanging type, horizontal bracket-style. The light can be suspended from ceiling through hanging wire line. The light can be also supported on aquarium through retractable outrigger.

8, There are 255 degrees in brightness in each light of different color to be chosen. Lights of different color are turned on in groups, so that efficacy is controlled flexibly.

9. Power supply is one of the most important parts in LED lights and it directly influence the quality. Our Power Electronics Solutions reach advanced levels in the world. The PF (Power factor) is more than 0.96. External electrical power supply is stable and quick in react when monitored. LEDs are powered by low tension to make a safe use and to have longer lifespan. Power supplies comply with UL, CE, CCC certification.

10. New housing patent model with aluminium alloy replace of old steel housing. It becomes lighter in weight and more easily in heat dissipation.

Specification

1, Power:  72W,108W,144W Available
2, Size ( mm): 600x320x130mm, 900x320x130mm, 1200x320x130mm
3, Input voltage: 100~240VAC 50~60Hz4, Infrared control distance: 0.5m~10m
5, Max Temperature of light: 65° C
6, Bridgelux , Cree brand 3W LED bulb Available White10000k /White 14000k /  white 18000k/ blue 460nm /moon blue453nm/ purple427nm Color Ratio Customized
7, Optional 60,90 degree view angle

Feather

1. Three control ways: First is remote controller, Second is attached button on panel housing side, Third is power supply rotary knob to adjust total light brightness. The LED screen ensures clear observation of the controller and the convenience of manual control. Time set system can be accurate to the very minute. 

2. Import high-performance chips, ensure the luminous effects. The main light device uses high-power LED chips. No heat radiation, Hardly any UV comes from LED’s. No hurt on Coral and more suitable for aquarium.

3. Low energy consumption, more power efficiency. LED has the feature of high brightness and low energy consumption, so under the same brightness, using LED, power is only half of the traditional lamp. Besides, LED can emit light from some direction, completely different from the traditional lights, emitting from all directions.

4. The light can operate automatically as predefined system. They can completely imitate the change of light in nature: The white lights turn gradually bright at dawn and turn gradually dark at dusk when the blue lights turn bright and only moonlight blue is left at midnight. The LEDs can even imitate the lunar cycle, which ensures better growth of your pets in this mimic nature light. Moreover, it can work normally even when you take a long time leave.It can simulate normal and four season(spring, summer, autumn and winter)

5.Color temperature can be custom-made, which can be used for both sea and fresh water. The color temperature for seawater is around 15000K~18000k and for fresh water is around 9000K~12000K. Our LED lamps' color temperature can be used both in sea water and fresh water. Other color temperature of lamps can be ordered. Blue-ray is a particular wavelength of 453nm moon blue light, suitable for the vast majority of the growth of marine organisms.

6. There are two kinds of installation mode supporting the main light body: hanging type, horizontal bracket-style. The light can be suspended from ceiling through hanging wire line. The light can be also supported on aquarium through retractable outrigger.

7, There are 5 degrees in brightness in each light of different color to be chosen. Lights of different color are turned on in groups, so that efficacy is controlled flexibly.

9. Power supply is one of the most important parts in LED lights and it directly influence the quality. Our Power Electronics Solutions reach advanced levels in the world. The PF (Power factor) is more than 0.96. External electrical power supply is stable and quick in react when monitored. LEDs are powered by low tension to make a safe use and to have longer lifespan. Power supplies comply with UL, CE, CCC certification.

10. New housing patent model with aluminium alloy replace of old steel housing. It becomes lighter in weight and more easily in heat dissipation.

Features

• 2 in 1 Salinity & Ph Monitor for Aquarium
  Accuary to monitor salinity
  Battery Charge function, No need to using a Power connect
  All in one design, include PH Pen/Probe and Calibration

Specification

Range
         PH: 0.00 ~ 14.00 pH
         Salinity: 0 ~ 199.9 ppt

Resolution
         PH: 0.01 pH
         Salinity: 0.1 ppt
Accuracy
         PH: 0.1 PH   
         Salinity: 2%F.S
Operating  Temperature: 0 50
Temperature Compensation: 0 50
Power  Supply: DC6V
Dimension: 110mm 51mm 22 mm

Feature

1, size: width 70MM, stretching up to 400MM,

2, for open tank on the back filter, or at the end of filtration tank, clip-mounted;

3, adjustable screen angle of algae, algae retractable screen length;

4, with appropriate water and lighting, to a limited sea-water tanks to improve water quality, ecological stability;

Provide customer design contact us with email admin@reefshops.com

1, Dimensions: Length 300 * W (190 / cylinder +110 / back filter) * high 300MM;

    Standard: cylinder, 700L / H pump flow smaller, universal flat water nozzle;

2, water: 25L; for seawater, freshwater fish, shrimp, snails, etc.;

3, 5MM thick transparent acrylic plate refined;

4, a positive small-angle bending, the bottom four feet acrylic columns, beautiful shape, easy to use;

5, the back two filter cells: laser comb plate, unique design with film and the bottom of the garbage nowhere to escape,

6, universal water nozzle can be adjusted either direction, and play a role in making flow oh;

Provide customer design contact us admin@reefshops.com

PH HI/LO action function switch

It is the spart part for Bubble Magus BM-NAC6A BM-NAC7 BM-100 / BM-105 Protein Skimmer
it is working with ATMAN PH2500 pump the unit include the mesh wheel, rotor, axis
you can use it directly in the ATMAN PH2500 pump

MINI-70-C (removable) multi-filter:
1, with PH-300 pumps,
2, 100-800 ml can be adapted to filter material.
3, diameter 70 mm, height 420, plate size 100 * 100 (oval)
4, barrel body with 4MM thick acrylic tube, the outlet for the mini-tuning type, beautiful and convenient and practical base with removable +8 word hole, easy accessibility, the use of strong, safe;
5, using the water, the pump placed in the bottom of the filter (water), sump built, space-saving and efficient.

Mini 100 Filter:
1, with PH-500 pumps,
2, the filter barrel diameter of 100 mm total height of 400, plate size 120 * 120 (oval);
3, barrel body with 4MM thick acrylic tube, the outlet for the mini-tuning type, beautiful and convenient and practical base with black 8MM thick, sturdy, safe;
4, using the water, the pump placed in the bottom of the filter (water), sump built, space-saving and efficient.

Video:http://www.youtube.com/watch?v=6dcfBcM69Lw

60W CREE LED Aquarium Light

CREE LED Aquarium Light

high quality design with CREE XR-E 3watt white and 3watt blue bright LEDs. It performs over 10 times than MH lamp on PAR reading, only 60W. 30 degree view angle can focus the light to deeper place, and 60 degree is also optional.

CREE LED aquarium light is special for corals like SPS, LPS in marine reef tanks. LED aquarium lights are really worthy to choose now, they save much energy (50%-80%), much more efficient with high PAR reading and no UV radiation harm.

 

Features

• 60 watt using CREE XR-E series 10 3watt 6000~9000k white and 10 3watt 455nm royal blue
• High PAR value. 200 PAR reading for each LED from 5" distance
• Two dimmers for white and blue, fan can be turned on/off
• Corrosion-proof finish/casing by special painted
• Optional 30-60 degree view angle, focus light to deep bottom
• Pure 450~460nm spectrums, No UV radiation harm
• Less heat, no chiller unit required, 20-30º C on water surface
• One fan on back runs against heat
• External power supply, detachable power cord
• Hanging kits included
• Five-year factory warranty

Parameters

Item	Value	Item	Value
Power	60W	LED Quantity	10x3w white & 10x3w blue
Size	15.8”L x 5.6”W x 3.0“H	LED angle	25, 60, 90, 120 degree
Operating Frequency	50Hz/60Hz	LED Color	White & Blue, Custom design
Voltage	AC85-260V	LED Type	XREWHT-L1-Q5-0000-00D01 3W White XREROY-L1-D3-0000-00A01 3W Blue
Input Current	0.28~0.46A	Lumens	4800 lm
Work Temperature	–20ºC to 60ºC	Replace HPS	600W
Lighting Time	10-16 hours/day	Lighting Area	10~15 M²
Lifespan	50,000 Hours	Weight	14.3 pounds (6.5 kg)1

 

What’s in the box

• 60W LED Aquarium Light
• Specification
• External Power
• Connect Power Cord
• Digital Timer
• Hang Kits
• Tool Set

12W LED Aquarium Light

12W LED Aquarium Light Performance (90º View Angle)

Meet the requirements of corals growing like SPS, LPS in marine reef tanks. Using 10000-20000K bright white LEDs and 460nm blue output really high PAR value, perform much better than MH lamps.

Features

• Wide voltage design (AC85-260V)
• Wide angel LEDs (90/120 degree) insures uniform coverage
• Smart appearance: build-in power supply, Light weight, Small volume etc
• Power supply with real steady voltage and current
• Can be combined use with HPS & MH lights
• 50,000 hours lifespan
• One-year factory warranty

Parameters

Features

• 10000-20000K white perform high PAR value
• Easy on/off Switch for light
• Corrosion-proof finish/casing by special painted
• Optional 30 degree view angle, focus light to deep bottom
• Pure 450-475nm spectrums, No UV radiation harm
• Less heat, no chiller/cooler unit required, 20-30º C on water surface
• Two small fans run against heat, detachable power cord
• Hanging kits included
• Three-year factory warranty

75w Parameters

100W Parameters

200W Parameters

300W Parameters

400W Parameters

Technical parameters: S-type

1) to an adsorption device nitrate NO3-, NO2-total 12500mg-13000mg.
2) adsorption optimal flow 25 to 35 liters / hour.
    Adsorption can be achieved minimum: NO3-5-12mg / L, NO2-0-0.1mg / L
    Equilibrium value: NO3-15-25mg / L
3) to avoid particulate materials are water pollution and reduce service life.
4) When the cylinder NO3-, NO2-total should be higher than 13000mg through adsorption - regeneration can be maintained until it reaches the normal value after a longer period of time.
5) can be used in tandem for more than two groups to control NOx adsorption NO3-, NO2-and the total amount of regeneration fluid increased in proportion.
To the regeneration of NOx control methods:
With 4.5kg of solid Nacl (sodium chloride) or table salt dissolved in 32L of water (without NO3-) dissolved to start the pump (water pump with 15-30W) will be recycled to the denitrification device through the liquid flow rate of 30-40L / hour, fluid drain out of the regeneration (regeneration solution must not be into the eco-cylinder, because the regenerated washing liquid contains a lot out of NO3-, NO2-), after adding 8L of water (without NO3-)
Cleaning device to nitrate. Completed, the device can continue to use nitrate.
(For the following sea-250L tank)

Specifications: 25cm * 12.5cm * 50cm (L * W * H)

Packaging Specifications: 32cm * 19.5cm * 57.5cm (L * W * H)

Technical Parameters

   1 to an adsorption device nitrate NO3 ¯, NO2 ¯ total 20000mg-22500mg
2. Adsorbed optimal flow 25-35 l / hour, can reach the lowest absorption value: NO3 ¯ 5-12mg / L, NO2 ¯ 0-0.1mg / L, equilibrium value: NO3 ¯ 15-25 mg / L
    3 to avoid particulate materials are water pollution and reduce service life.
   4 When the cylinder NO3 ¯, NO2 ¯ total should be higher than 22500mg After adsorption, a regeneration can be maintained until it reaches the normal value after a longer period of time.
    5 can be used in tandem more than two groups to control NOx adsorption NO3 ¯, NO2 ¯ and the total amount of regeneration fluid increased in proportion.
 
Approach to the regeneration of NOx control
    With 7.5KG solid Nacl (sodium chloride) or table salt dissolved in 48L of water (without NO3 ¯), dissolved in liquid to start the pump will be recycled to the denitrification device through a flow rate of 30-40L / hour, the regeneration fluid drain out of , (liquid must not be recycled into eco-cylinder, because the regenerated washing liquid contains a lot out of NO3 ¯, NO2 ¯), after adding 15L of water (without NO3 ¯) to nitrate cleaning device. Completed, the device can continue to use nitrate.

Specifications: 40cm * 20cm * 45cm (L * W * H)



Technical Parameters

   1 to an adsorption device nitrate NO3 ¯, NO2 ¯ total 30000mg-33750mg
2. Adsorbed optimal flow 25-35 l / hour, can reach the lowest absorption value: NO3 ¯ 5-12mg / L, NO2 ¯ 0-0.1mg / L, equilibrium value: NO3 ¯ 15-25 mg / L
    3 to avoid particulate materials are water pollution and reduce service life.
   4 When the cylinder NO3 ¯, NO2 ¯ total should be higher than 33750mg After adsorption, a regeneration can be maintained until it reaches the normal value after a longer period of time.
    5 can be used in tandem more than two groups to control NOx adsorption NO3 ¯, NO2 ¯ and the total amount of regeneration fluid increased in proportion.

Efficient phosphorus removal agent is through a special process composite made ​​of composite materials. For water, fresh water, phosphorus in an instant (PO43-) precipitation in the composite, to phosphorus (PO43-) effects on aquatic organisms do not have an impact on reducing eutrophication have excellent results.
High phosphorus (PO43-) Technical parameters:
1, the maximum deposition of phosphorus (PO43-) is greater than 1500mg;
2, the export of phosphorus (PO43-) concentrations of up to 0.01mg / L or less.

Diameter:25mm

Material:acrylic

Length:20CM,25CM,33CM

with two suction cup

1, Material: 6MM thick transparent acrylic sheet, laser engraving, processing;

2, scalable, ranging from 90-150MM or so, to apply to children under the water of different heights;

3, can be an effective solution to cross under the water too long because the center of gravity caused by water pipes under the sink and tilt, and even the water leaking joints and seepage by leveraging the case.

4, all parts of the plastic material in order to prevent sea water, including the screws are plastic, suitable for sea water tanks, water tanks.

5, factory outlets, large concessions Oh.

1, frame size: length 19CM * W 12.7CM, 9MM can clip the thickest glass with 8MM thick acrylic material, super-strength

2, opening 5CM, adjustable 3. 5CM, up to adjust the size 11CM, minimum regulation size 8CM.

1, the barrel body surface engraved with the scale fish easier to add friends to observe the trace of the situation.

2, Size: 10 * 10 * 16.5CM

3, Capacity: 1.5L

4,4 MM transparent acrylic material, activities cover, with 2 quick connectors, built-in transparent acrylic thin tube, the overall

1, transparent acrylic tube + plate production, refined, practical and not afraid of water! Mute no sound!

2, color: red, black, white.

3, Size: transparent muffler pipe 32MM(diameter) * 50MM(length), connected to the nozzle diameter of the trachea 6MM(8MM) * 10MM.

1, Model: RF-70D;

2, the feeding tube diameter: 70mm;

3, the feeding tube height: 100mm;

4, the products size: 105 * 80 * 100mm;

5, for an open tank or reinforcement tank, for the most 20MM thick glass.

1, Model: RF-50D;

2, the feeding tube diameter: 50mm;

3, the feeding tube height: 100mm;

4, the products size: 80 * 60 * 100mm;

5, for an open tank or reinforcement tank, for the most 20MM thick glass.

Feature

1. Make ozone from the normal air for the pond and tank Ozonizer
2. Providing clear and healthy water for your fish,reducing the microbial load of the water.
3. Highly reducing the nitract,ammonia and pollutants in the water
4. Improving the oxygen content of oxidation-reduction protential in
the water.
5. Electric controlling the ozone output
6. Connnect with the skimmer and air pump using
7. Fit for 20-500liters tank
8. Suitable for  fresh water and salt water

Specification

ET-50 50mg/h

ET-100 100mg/h

With celibration liquid and mounting kit

In- Sump/Out-Sump  Model: AE-IE1

Specification:

•  Power 220V to 240V 50Hz
•  needle wheel
•  Size :  290 * 270 * 540 (mm)
•  Pump : Aquabee 2000I
•  Watt: 17W
•  Capacity: 1000L 

VOLT.：1220~240V

FREQ.：50

POWER：135W

QMAX.：4680 L / Hr  1238GPH

HMAX.：8.5m  27.9ft

INLET & OUTLET：G1"

FEATURE

a. Innovative structure with aluminum cover ensures liquid passing through without leakage

b. Anti-corrosion design used extensively in various industries and applications

c. Heavy-duty ceramic axle sleeve for long life durability and reliability

d. In-line use only

Specification

Needlewheel cone protein skimmerBM-NAC H9
Capability : 800L-1500L (211G-400G)
Pump:atman ph4000 (made in china)
Pump power: 81W,  220V 50Hz
Dimensions: 240×300×600mm( 9.4" * 11.8" * 23.6 ")"
Water Level :9.5"-11"

Specification

Needlewheel cone protein skimmer BM-NAC H8
Capability : 500L-700L (130G-185G)
Pump:atman ph3000 (made in china)
Pump power: 28W,  220V 50Hz
Air intake : 500L/H
Dimensions: 250×185×510mm( 9.8" * 7.28" * 20.0 ")
Cylinder: Max 9"
Water Level :9.5"-11"

Specification

Meshwheel cone protein skimmer:BM-NAC H7
Capability : 500L-700L (130G-185G)
Pump:atman ph2500 (made in china)
Pump power: 28W,  220V 50Hz
Air intake : 500L/H
Dimensions: 250×185×510mm( 9.8" * 7.28" * 20.0 ")
Cylinder: Max 9"
Water Level :9.5"-11"

MODEL JVP-200
VOLTAGE 110V/220V/240V
FREQUENCY 50Hz/60Hz
POWER 6W
OUTPUT 5000L/h
WEIGHT 0.35Kg
DIMENSIONS 115*65*75mm

MODEL JVP-402
VOLTAGE 110V/220V/240V
FREQUENCY 50Hz/60Hz
POWER 48W
OUTPUT 24000L/h
WEIGHT 2Kg
DIMENSIONS 300*650*570mm

Feature

• Automatically micro-computer control
• Pump is supplied a long life Pharmed hose(lifespan is 60 times than silicon tubes)
  
• Interactive interface parameter settings
• Use Calibration system, to Calibrate pumps, more accurate
• Can manage up to 6 channel of expansion
• pump can be set start and stop time separately

Specifications

• Model: MCD-3-M
• Power: AC 100-240V 50/60Hz 
• Accuracy: better than ± 3%
• Size: 220x140x60mm
• Flow:1-4999ml
• Cycle : Max :24 cycle per day
• 6M silicon Tube include
• A measuring cylinder include

Feature

• Automatically micro-computer control
• Pump is supplied a long life Pharmed hose(lifespan is 60 times than silicon tubes)
  
• Interactive interface parameter settings
• Use Calibration system, to Calibrate pumps, more accurate
• Can manage up to 6 channel of expansion
• pump can be set start and stop time separately

Specifications

• Model: MCD-3-M
• Power: AC 100-240V 50/60Hz 
• Accuracy: better than ± 3%
• Size: 220x140x60mm
• Flow:1-4999ml
• Cycle : Max :24 cycle per day
• 6M silicon Tube include
• A measuring cylinder include

Feature

Specification

VIBRATION PUMP MODEL JVP-100A
VOLTAGE 110V/220V/240V
FREQUENCY 50Hz/60Hz
POWER 3W
OUTPUT 2500L/h
WEIGHT 0.25Kg
DIMENSIONS 70*70*90mm

VIBRATION PUMP MODEL JVP-200A/B
VOLTAGE 110V/220V/240V
FREQUENCY 50Hz/60Hz
POWER 6W
OUTPUT 5000L/h
WEIGHT 0.35Kg
DIMENSIONS 115*65*75mm

VIBRATION PUMP MODEL resun waver 2000
VOLTAGE 220V/240V
FREQUENCY 50Hz
POWER 3W
FIT FOR 40-60 liters tank
DIMENSIONS 6*4*4.5CM

NOTE:IT'S WITHOUT MAGNETIC BASE.

VIBRATION PUMP MODEL resun waver 4000
VOLTAGE 220V/240V
FREQUENCY 50Hz
POWER 6W
FIT FOR 80-120 liters tank
DIMENSIONS 9.5*7.5*5.5CM

• size:31.5cm (12.6") X 11cm (4.4") X 17.5cm ( 7")

Intruction:

Capability : 1000L-2000L(265G -520G)
                 pump:AQUABEE 5000
Pump power: 42W, 220V 50Hz 
                   air intake : 1200L/H
Dimensions: 370*290*645mm(14.5" * 11.4" * 25.4")
                   Water Level :9.5"-11"

Through easy to disassemble the function, the body can be adjusted rapidly rotating inlet position, the bottom cylinder to adapt to different sump requirements.

Intruction:

Capability : 700L-900L(185G -240G)
                 Auqbee 2000/I 
Pump power: 19W, 220V 50Hz 
                   air intake : 500L/H
Dimensions: 250*185*525mm(9.8" * 7.2" * 20.6")

                   Water Level :9.5"-11"

Through easy to disassemble the function, the body can be adjusted rapidly rotating inlet position, the bottom cylinder to adapt to different sump requirements.

Intruction:

Capability : 1200L-1700L(315G-450G)
                 EHEIM   1260
Pump power: 33W, 220V 50Hz
                   air intake : 960L/H
Dimensions: 230*310*600MM   (9.0" * 12.2" * 23.6")
                   Water Level :9.5"-11"

Through easy to disassemble the function, the body can be adjusted rapidly rotating inlet position, the bottom cylinder to adapt to different sump requirements.

Intruction:

Capability : 1000L-2500L(265G-660G)
                 AQUABEE UP4000
Pump power: 34W, 220V 50Hz
                   air intake : 1320L/H
Dimensions: 370*290*610MM   (14.5" * 11.4" * 24.0")
                   Water Level :9.5"-11"

Through easy to disassemble the function, the body can be adjusted rapidly rotating inlet position, the bottom cylinder to adapt to different sump requirements.

Model:A81

Power:18W

Ozone Output: 400mg/h 

Adjustable timing:0-30min

Size:25×18.5×8.5cm

MAGNET FRAG HOLDER for SKU98828

Buy sps base here