Specifications: 25cm * 12.5cm * 50cm (L * W * H)
Packaging Specifications: 32cm * 19.5cm * 57.5cm (L * W * H)
Technical Parameters
1 to an adsorption device nitrate NO3 ¯, NO2 ¯ total 20000mg-22500mg
2. Adsorbed optimal flow 25-35 l / hour, can reach the lowest absorption value: NO3 ¯ 5-12mg / L, NO2 ¯ 0-0.1mg / L, equilibrium value: NO3 ¯ 15-25 mg / L
3 to avoid particulate materials are water pollution and reduce service life.
4 When the cylinder NO3 ¯, NO2 ¯ total should be higher than 22500mg After adsorption, a regeneration can be maintained until it reaches the normal value after a longer period of time.
5 can be used in tandem more than two groups to control NOx adsorption NO3 ¯, NO2 ¯ and the total amount of regeneration fluid increased in proportion.
Approach to the regeneration of NOx control
With 7.5KG solid Nacl (sodium chloride) or table salt dissolved in 48L of water (without NO3 ¯), dissolved in liquid to start the pump will be recycled to the denitrification device through a flow rate of 30-40L / hour, the regeneration fluid drain out of , (liquid must not be recycled into eco-cylinder, because the regenerated washing liquid contains a lot out of NO3 ¯, NO2 ¯), after adding 15L of water (without NO3 ¯) to nitrate cleaning device. Completed, the device can continue to use nitrate.