LED Display

Auto. Test PH

Simple Operation

Durable and Reliable

Observation Momentarily

Ideal for Saltwater and Freshwater



Specification:

1. Model : PH-2000

2. Voltage : AC220 ~ 240V/50Hz

3. Power: 2.5W

4. Measurement: 0 ~ 14 PH

5. Resolution: 0.01 PH

6. Accuracy: 0.01PH

7. Mainframe Dimension : 160 85 40mm

8. Wire:EU standard, 1.5m length





Operating:

1. Connect the AC power(220V-240V/50Hz);

2. Connect the PH electrode to PH terminal.

3. Put the PH electrode into the buffer solution with the standard PH7.And then, adjust the knob AL PH7with the plastic screwdriver till the display reads .00 After calibration, put the electrode into the water.

4. Natural PH value of limnetic aquarium is PH6.8~PH7.2; seawater aquarium is PH8.0~PH8.4.






Cleaning and Maintain:

1. Plug off the ORP controller before clean it.

2. Don put the ORP electrode into the water deeper than the electrode cap.And clean it with soft brush every month. Put the electrode into the preservation solution when it is not in working condition and it is normal for riming.

3. Don hit the electrode and keep it well for it is a precision instrument.

4. Don clean the ORP electrode with hand,cloth or alcohol ect.

5. Use indoor only.

No posts found
 

Add new post

Your name: *

Your rating: * Excellent! Very Good Average Fair Poor

Your message: *

To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.

  

Characters: 

Submit

Name of your friend:   

E-mail of your friend: *

Your name:   

Your e-mail:   

Your message: *

Weipro Digital AQUA PH Meter PH-2000 with Probe

To ensure that a person, not an automated program, is filling this form, please enter the characters you see in this picture. All letters will be shown in their capitalized form.

  

Characters: 

Send